CABLE TRAY ACCESSORIES
 
DIVIDER STRIP
 
 
Divider strip is supplied in ten foot lengths. Unless indicated otherwise, dividers are intended for field installation. For securing divider to tray we recommend the use of thermoplastic drive rivets which require field drilling, or adjustable divider clamps (see below). To order straight sections with divider installed, simply add the letters EDS after the straight section catalog number. Indicate installation position.

Example: EHL6-12-12-20-EDS
 

Tray Type

 Catalog Number

Polyester

EDS-P

Vinyl Ester

 EDS-V
 
Refer to the Fitting Section for ordering factory installed dividers for pre-assembled fittings.