Mitered Fittings
Pre-assembled mitered fittings are available for all tray types. Fittings are assembled using 316 SS fasteners unless specified otherwise. When connecting to molded fittings or straight sections, expansion splice plates are recommended. For conductive and halogen-free low smoke plus cable tray, splice plates must be stainless steel. Rung connections are made with a mechanical and/or chemical lock (see specification, pg. 12, item 5.2.4). For assistance with other sizes and widths including 10" mitered fittings, please contact us. For quick viewing, please see all of our mitered fittings in our Mitered Fittings Data Sheet.
PART NUMBERS
For vertical tee, specify "up" or "down" at the end of the part number. Covers = EC before part number; example: EC-EHB-HL6-90-24-24. Fasteners for covers are seperate order item. Strut Rung = SR after part number; example: EHB-HL6-90-24-24-SR. Marine Rung = MR after part number; example: EHB-HL6-90-24-24-MR
* = (mm) values are nominal. For vertical tee, specify "up" or "down" at the end of the part number. Covers = EC before part number; example: EC-EHB-HL6-90-24-24. Fasteners for covers are seperate order item. Strut Rung = SR after part number; example: EHB-HL6-90-24-24-SR. Marine Rung = MR after part number; example: EHB-HL6-90-24-24-MR
SELECTION TABLE
Look at the left column to select resin, then look at the top row to select tray type. Then, insert corresponding letter into part number.
MITERED FITTINGS
90° Horizontal Bend
90° Vertical Inside Bend
90° Vertical Outside Bend
90° Horizontal Direct Bend
Horizontal Adjustable Bend 45°-135°
30°, 45°, 60° Horizontal Direct Bend
45° Horizontal Bend
30°/45° Vertical Inside Bend
30°/45° Vertical Outside Bend
30°/45° Vertical Inside Direct Bend
30°/45° Vertical Outside Direct Bend
Straight Reducer
Right or Left Reducer
Horizontal Tee
Horizontal Cross
Vertical Tee
